Description
Outin Coffee Stand
A 123 g tripod coffee stand machined from a single block of anodised aluminium, folding to 18.5 mm thin and clipping to a bag by its included carabiner.
The Outin Foldable Coffee Stand is a three-legged brewing platform machined from a single block of aluminium and finished with anodisation. It suits campers, hikers and travelling espresso drinkers who want a stable base for the Outin Mino, Outin Nano or a pour-over dripper without giving up pack space, and it is half the weight of the original stand it evolved from.
The clever part is how it disappears when you are done. The three legs fold the stand down to 128.2 x 126 x 18.5 mm, slim enough for a pouch or pocket, and the detachable carabiner clips it to a rucksack, belt or gear loop. At 123 g, you will barely notice it is there until it is time to brew.
Ideal For
The tripod legs settle onto uneven benches and camp tables, holding the Mino or Nano level while a shot pulls. Folded, it clips to the outside of a pack and stays out of the way.
The 68 mm inner ring accepts standard drippers and conical funnels, turning a flat surface into a brew bar. Outin does advise checking your own dripper's fit before you set off.
For one-bag travellers every gram counts. At 123 g and 18.5 mm folded, the stand adds real stability to a coffee kit without claiming meaningful space or weight in the luggage.
Key Features
Machined from a single block of aluminium, the one-piece unibody construction balances strength, lightness and elegance, with no joints or fixings across the main body.
The three legs collapse the stand to 128.2 x 126 x 18.5 mm, slim enough to slide into a pouch, a side pocket or the flat of a suitcase.
A detachable carabiner comes in the box, so the folded stand hangs from bags, belts or outdoor gear instead of taking up space inside your pack.
Triangular support spreads the load across three legs, giving excellent balance and stability on surfaces from kitchen worktops to campground tables.
The ring is designed to hold the Outin Mino, Outin Nano, standard drippers and conical pour-over funnels; Outin recommends checking fit before use.
Set up, the platform sits 124 mm above the surface, leaving room for a cup to wait beneath your espresso machine or dripper as it brews.
Machined from a single block
Most folding gear is an assembly of parts, and every joint is a place to work loose. Outin took the opposite route here. The stand's body is machined from a single block of aluminium, then anodised for durability, so the structure is one continuous piece where it matters. The result is a stand that weighs just 123 g yet feels like one solid piece, because for the most part it is.
Folds flat, clips on, disappears
A stand only earns a place in a pack if it costs almost nothing to carry. Folded, this one measures 128.2 x 126 x 18.5 mm, roughly the footprint of a saucer and thinner than most wallets. The detachable carabiner then takes it off your hands entirely, clipping the folded stand to a rucksack strap, belt or gear loop so the space inside your bag stays free for beans and brewer.
Steady ground for every brewer
Three legs beat four on rough ground, because a tripod cannot rock. That geometry is what lets the stand sit level on kitchen worktops, picnic benches and campground tables alike, holding your brewer steady at 124 mm with a cup waiting underneath. The 68 mm inner ring is shaped for the Outin Mino and Nano, and it also takes standard drippers and conical pour-over funnels, so one stand covers espresso and filter duty on the same trip. Outin sensibly advises checking that your own dripper or funnel fits before you rely on it, and the box keeps things simple: the stand and its carabiner, ready to clip on and go.
How It Compares
| Coffee Need | Outin Technology | Practical Benefit |
|---|---|---|
| Espresso at the campsite | Tripod triangular support | Three legs balance on uneven camp tables so the machine stays level while the shot pulls |
| Hiking light | 123 g aluminium unibody | Adds a full brewing platform to your kit while barely registering on the scales |
| Clipping to a pack | Detachable carabiner | The folded stand hangs from a rucksack strap or belt loop, saving the space inside the bag |
| Hotel-room brew | 18.5 mm folded profile | Slips flat into a suitcase or pouch and sets up on the desk in seconds |
| Mino and Nano owners | Purpose-designed fit | Made to hold the Outin Mino and Nano steady, with a cup sliding underneath at 124 mm |
| Pour-over anywhere | 68 mm inner ring | Standard drippers and conical funnels rest in the ring for hands-free pour-over away from home |
Specifications
| Brand | Outin |
| Model | OT-FCS-01 |
| Type | Foldable tripod coffee stand |
| Material | Anodised aluminium |
| Construction | Unibody, machined from a single block of aluminium |
| Design | Three-leg (tripod) folding structure |
| Compatibility | Outin Mino, Outin Nano, standard drippers and conical pour-over funnels |
| Carabiner | Detachable clip-on carabiner included |
| Inner ring diameter | 68 mm (2.68 in) |
| Height (standing) | 124 mm (4.88 in) |
| Dimensions (folded) | 128.2 x 126 x 18.5 mm (5.05 x 4.96 x 0.73 in) |
| Weight | 123 g |
| Packaging dimensions | 165 x 165 x 30 mm (6.50 x 6.50 x 1.18 in) |
| Packaging weight | Approx. 360 g |
The Verdict
Strengths
- Unibody machined from a single aluminium block
- Anodised finish for improved durability
- Just 123 g, folds to 18.5 mm thin
- Detachable carabiner included for clip-on carrying
- Stable tripod geometry suits uneven surfaces
- Fits Outin Mino, Nano and standard drippers
- 124 mm standing height with 68 mm ring
Considerations
- Dripper and funnel compatibility varies by shape; Outin advises checking your gear fits the 68 mm ring before relying on it.
- The standing height is fixed at 124 mm, so there is no adjustment for unusually tall cups or mugs.
- The box contains the stand and carabiner only; the espresso machine, dripper and cup shown are not included.
What's in the Box
- Foldable coffee stand x1
- Carabiner x1
