Description
The Adventurer 5M Pro takes everything that makes the Adventurer 5M quick and easy to use and puts it inside a fully enclosed chamber. The enclosure holds a steady temperature around the print for more consistent results, and opens the door to ABS and ASA alongside PLA and PETG.
It is a printer you can live with, too. Dual-layer HEPA and activated-carbon filtration blocks 99% of particles and VOCs, a low-noise mode runs at 50dB, a built-in camera lets you check on prints remotely, and it can be fully set up within ten minutes of unboxing.
What stands out
Enclosed for better prints
The sealed chamber keeps the internal temperature steady, so prints come out more consistent and engineering materials such as ABS and ASA join PLA, PETG, TPU and carbon-fibre blends on the menu.
Cleaner air
Internal and external air circulation passes through HEPA and activated-carbon filters, blocking 99% of particles and VOCs, which matters when the printer shares a room with you.
Quiet when it matters
Low-noise mode runs at 50dB, with 55dB in standard mode, so it suits a home office or a shared living space.
Keep an eye on it
A built-in camera lets you check on prints remotely, while automatic shutdown, a filament run-out reminder and power-loss recovery look after long jobs.
CoreXY speed
All-metal CoreXY motion travels at up to 600mm/s with 20,000mm/s² acceleration. The 280°C direct-drive hotend heats to 200°C in about 35 seconds and flows up to 32mm³/s, and dual cooling fans keep fast prints crisp.
Ready in minutes
Automatic levelling, a flexible PEI steel build plate and a 4.3-inch touchscreen make it beginner-friendly from day one, with Wi-Fi, Ethernet and USB for sending jobs.
Key features
- Build volume: 220 x 220 x 220 mm
- Structure: All-metal CoreXY, fully enclosed
- Speed: Up to 600 mm/s travel, 20,000 mm/s² acceleration
- Extruder: Direct drive, up to 280°C, 32 mm³/s flow
- Filtration: HEPA and activated carbon, blocks 99% of particles and VOCs
- Noise: 50 dB low-noise mode, 55 dB standard
- Camera: Built-in, for remote monitoring
- Build plate: Flexible PEI steel plate, up to 100°C
- Bed levelling: Automatic
- Filaments: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF
- Connectivity: Wi-Fi, Ethernet, USB
- Display: 4.3-inch touchscreen
