Description
Ecovacs built the Gen3 for homes with low furniture and mixed floors. TrueMapping 2.0 maps 100 square metres in about eight minutes, ultrasonic sensors spot carpet and lift the pads 9mm while boosting suction, and the ZeroTangle 3.0 brush uses a triple V-shape to lift hair away rather than wind it up.
A Vision-Language Model behind the structured-light camera recognises what is on the floor and decides whether to avoid it or clean it, and the ECOVACS HOME app sets water flow in 50 steps, no-go zones and schedules. This is the white UK edition with the station base included.
What stands out
81mm ultra-thin body
Fully embedded dToF LiDAR lets it clean under furniture other robots cannot reach.
25,000Pa suction
High-speed motor with a straight-through air path for carpets and hard floors.
OZMO Turbo 2.0 mopping
Dual rotating pads with five-fold cleaning for dried coffee and sticky spills.
TruEdge 2.0
Extendable side brush and variable mop plate clean to within 1mm of edges.
OMNI station
Auto-empty into a 3L bag, 75 degree hot-water pad washing, 45 degree hot-air drying, auto refill and solution dosing.
AIVI 3D 3.0 and AI Instant Re-mop
Structured light, RGB camera and a Vision-Language Model avoid obstacles and re-mop stains.
Up to 210 minutes
6,400mAh battery; TrueMapping 2.0 maps 100 square metres in about 8 minutes.
Key features
- Type: Robot vacuum and mop with OMNI station
- Height: 81mm
- Suction: Up to 25,000Pa with auto boost
- Mop: OZMO Turbo 2.0 dual rotating pads, 9mm lift on carpet
- Edge cleaning: TruEdge 2.0, about 1mm from edges
- Station: 3L dust bag, 75 degree pad washing, 45 degree drying, 4L clean and 4L dirty tanks
- Navigation: Embedded dToF LiDAR, AIVI 3D 3.0 obstacle avoidance
- Battery: 6,400mAh, up to 170 minutes vacuuming or 210 minutes vacuum and mop, about 4 hour charge
- In the box: Robot, OMNI station with dust bag, station base, side brush, power cord, manual










