Description
BLUETTI's Apex 300 is sold as a bare power station, with the optional Hub D1 adding USB-C, USB-A, car and Anderson DC outputs and the Hub A1 handling parallel running and fast AC charging. Its AC bypass port passes up to 50A so it can sit between the grid and a consumer unit.
Standby draw is 20W, the case is IP20 for indoor use, and at 38kg it carries on two handles. The box holds the AC charging cable, car charging cable and grounding screw.
What stands out
2,764.8Wh, expandable to 19,353.6Wh
Stack up to six B300K batteries; mix with B300 and B300S.
3,840W pure sine wave, 7,680W surge
Four 13A UK sockets; three units parallel to 11,520W via the Hub A1.
6,000+ cycle LiFePO4
Second-generation automotive-grade cells for up to 17 years of use.
2,400W solar input
Two XT60 inputs, 12 to 60V, 20A each; 80% in 55 minutes.
Fast AC charging
Up to 2,300W from the wall, 3,840W with the Hub A1; Silent, Standard, Turbo and Custom modes.
UPS under 20ms
Keeps essentials running when the grid drops; AC bypass up to 50A.
App and updates
BLUETTI app over Wi-Fi and Bluetooth with OTA firmware updates.
Key features
- Capacity: 2,764.8Wh LiFePO4, 6,000+ cycles, expandable to 19,353.6Wh
- AC output: 3,840W pure sine wave, 7,680W surge
- AC outlets: 4 x 230V 13A UK sockets
- DC outputs: Via the optional Hub D1 (USB-C, USB-A, car, DC5521, Anderson)
- AC charging: 2,300W max; up to 3,840W with Hub A1
- Solar input: 2 x XT60, 2,400W max (6,400W with SolarX 4K)
- UPS: Under 20ms; AC bypass up to 50A
- App: BLUETTI app via Wi-Fi and Bluetooth
- Weight: 38kg
- In the box: Power station, AC charging cable, car charging cable, grounding screw, user manual









